Skip to main content

The Human Services Professionals

Go Search
Home
Our Products
Frontline Apps
About Us
Contact Us
Our Rates
  
> Resources > The Human Services Professionals > FAQs and User Manuals > Client Manual Handling  

Client Manual Handling

 
Client Manual Handling - Generic Solutions
 
Task Solutions Risk Control W/sheet Type of Control
getting in or out of bed If person can’t assist: Lifting machine/electrical ceiling hoist: 2 staff required.  Adjust bed height. Do not lift clients legs or shoulders to fit sling - roll them. Position equipment to minimise movement of hoist whilst client suspended.   Correct sling fit and positioning should eliminate the need to lift client to reposition them once lowered in chair or bed  from hoist. 1 Elimination
getting in or out of bed If person can assist: Physical and Verbal prompts: to maximise clients body mechanics.  i.e.,  ensure client laying on their side & use their strongest upper limb closest to the mattress to push on mattress, to sitting.  clients strongest leg should slide towards the edge of the bed. 1  
getting in or out of bed If person can assist: Prompting by staff:  Ensure client sufficiently alert in morning.  Use noise, music, verbal interaction, light, incentives, and adequate time to prompt client to transfer from bed independently. Include physical prompts once client sufficiently alert, and motivated to transfer out of bed.  Physical prompts include; tapping clients legs & shoulder, towards sitting, and legs to slide feet off bed. 1  
getting in or out of bed If person can assist: Bed stick:  fitted to the edge of the bed.  Client pulls self to the side of the bed, into sitting then standing position.  Requires good upper limb strength, and  able to weight bear through legs. 1  
getting in or out of bed If person can assist: Standing hoist;  clients must be co operative and able to weight bear. Clients who are prone to uncooperative behaviour, become agitated, or do not have the cognitive skills to hold hoist reliably, are not suited to a standing hoist. 1 Elimination
getting in or out of bed If person can assist: Electric adjustable bed and backrest on bed:  to elevate client to sitting. Ensure  bed adjusted  to correct height client slides legs off bed with feet touching floor. Client is able to raise to standing.  Grab rail, bed stick, staff prompting may assist. 1  
getting in or out of bed Delay the transfer if client agitated or resistive. Bed bath/sponge, or continence aides as alternative to normal routine. 2 Substitution
getting in or out of bed If client can assist: Monkey bars / bed ropes. Client needs good upper body strength and cognition to assist.  2 Engineering
getting in or out of bed If client can assist. Elevate bed heights:  to maximise client's mobility and physical function,  to transfer from sitting on the side of the bed to standing. High / Low Electric bed recommended.  2 Engineering
getting in or out of bed If client can assist. Lower bed height: to maximise clients ability to transfer into bed, i.e. thinner mattress,  reduce height of bed legs. High / Low Electric bed recommended  2 Substitution
getting in or out of bed No Generic Solution available 3  
sitting person up in bed If person can assist: Verbal and Physical prompts: to maximise clients body mechanics, & independence i.e.,  prompt client to push through their strongest side,  bend one or both knees, and push down  on feet into the mattress.  At the same time client should push with their strongest upper limb. 1 Elimination
sitting person up in bed If person can assist: Electrically operated back rest –  Ensure the client is positioned correctly in bed to enable them adopt suitable sitting position, i.e.; Prompt the client to position themselves up the bed, before adjusting the back rest, or use slide sheet. See solution for moving in bed. 1  
sitting person up in bed If person can assist: Client positions themselves using a bed stick, bed rope or  bed ladder.  Client requires high levels of upper limb and strength and co ordination, in both arms for rope and ladder, and at least one arm for bed stick.  Position equipment for use by clients strongest upper limb. 2 Substitution
sitting person up in bed If person can assist: Client positions themselves using a slide sheet ( folded) with prompting from staff.  Slide sheet placed under clients hips. Client bends knees, and pushes down on mattress with feet ( staff may help to stabilise clients   feet).    Client slides backwards up on  bed on slide sheet as they push through feet.  May be used in conjunction with bed stick,  or bed rope. See solution for moving client in bed. 2 Engineering
sitting person up in bed If person can’t assist: Avoid client sitting up in bed. Transfer client via hoist into sitting posture in chair out of bed. 2  
sitting person up in bed If person can’t assist: Review why the client needs to sit up in bed. Maybe existing practices can be changed i.e. medication given before client put to bed etc.  3 Administration
sitting person over the edge of the bed If client can assist: electric operated backrest on bed to raise client to sitting position. Lower bed height to allow foot support for client.  1 Elimination
sitting person over the edge of the bed If client can assist: use bed stick;  Client moves feet to edge of the bed.  Client rolls onto side, and reaches for bed stick.   client uses bed stick to stabilise self in sitting.  Prompt person to assist client to slide feet off the edge of the bed. 2 Substitution
sitting person over the edge of the bed If client can’t assist: Move client to chair using hoist. Client stands from chair. 2  
sitting person over the edge of the bed If client can assist. electric adjustable bed and backrest on bed:  Bend clients knees. Adjust  backrest to sitting position.  Staff to slide clients feet off the edge of the bed, then raise backrest fully.  client can use upright backrest and  foot support for stability in sitting. 2 Engineering
sitting person over the edge of the bed No Generic Solution available 3  
moving person to or from their bed to wheelchair/commode/shower trolley If person can’t assist: Lifting machine/electrical ceiling hoist: 2 staff required.  Adjust bed height. Do not lift clients legs or shoulders to fit sling - roll them. Position equipment to minimise movement of hoist whilst client suspended.   Correct sling fit and positioning should eliminate the need to lift client to reposition them once lowered into  chair from hoist. 1 Elimination
moving person to or from their bed to wheelchair/commode/shower trolley If person can assist: Client uses body mechanics: Position wheelchair or commode  at right angles to bed on clients strongest side.  Suitable bed height, firm foot support, feet spaced evenly.   Client to  lean forward into standing, reaching to  arm rest of chair. 1  
moving person to or from their bed to wheelchair/commode/shower trolley If person can assist: Standing hoist;  clients must be co operative, and able to weight bear. Clients who are prone to uncooperative behaviour, become agitated, or do not have the cognitive skills to hold hoist reliably, are not suited to a standing hoist. 1 Elimination
moving person to or from their bed to wheelchair/commode/shower trolley If person can assist: Client uses body mechanics & walk belt: Position wheelchair or commode  at right angles to bed on clients strongest side.  Suitable bed height, firm foot support, feet spaced evenly.   Client to  lean forward into standing, reaching to  arm rest of chair.  Staff can prompt clients hips forward and to pivot to chair, using walking/ transfer belt. 1  
moving person to or from their bed to wheelchair/commode/shower trolley If person can assist: Transfer board / slide sheet: client sitting on edge of the bed.  Edge of transfer board slid under client buttock, forming  a bridge to the chair.  Client shuffles across transfer board to chair.  Use of slide sheet may assist.  Adjust equipment such that client transfers with down hill incline, i.e.; transfer to lower height.  Reverse process to transfer into bed from chair. 1  
moving person to or from their bed to wheelchair/commode/shower trolley If person can’t assist: 2 staff. place slide sheet under person and use “pat slide” board to side person to trolley. Both staff roll person off sheet.  2 Engineering
moving person to or from their bed to wheelchair/commode/shower trolley No Generic Solution available 3  
rolling person in bed If person can assist: Bed stick;  client pulls self  to roll onto side using bed stick, and prompts from staff, i.e. reaching, place far leg  across bed in direction of roll.  This assists clients hip movement. 1 Elimination
rolling person in bed If client  can’t assist: Using client's body mechanics, and 1 staff physical assistance: Adjust bed  staff's knuckle  height.  Staff place client's arm across body, and far leg across near leg in direction of roll.  Staff support client at hip and shoulder and roll client towards them. 2 Substitution
rolling person in bed If client can’t assist:  2 staff  assisting.  Adjust bed to correct height for staff . Staff place clients arm  and far leg  in direction of roll.  Staff  support client at hip and shoulder and roll client towards, 1st staff .    2nd  Staff pushes client towards 1st  staff . Where there is a height difference between staff, adjust bed height to suit taller staff.  Taller staff pull client in rolling action, shorter staff, push client. Both staff support clients hip and shoulders during roll.  2 Engineering
rolling person in bed Please scroll up 2  
rolling person in bed If client can’t assist: Slide sheets: 1 sheet folded, or 2 separate slide sheets.  2 staff recommended to assist. Staff stand on opposite sides of bed.  Place slide sheet under client,  ensuring it is under their  hips and shoulders.  1st staff  pulls top layer of slide sheet towards themselves whilst stepping backwards,  to roll client away from them.  2nd staff, on opposite side of bed, supports client to finish the roll.  Specific slide sheet training is required. 2 Substitution
rolling person in bed Pressure care mattress used to reduce need for rolling. 3 Training
rolling person in bed If rolling person to change sheets due to continence issues, review continence products presently used.  3 Training
moving person in bed If person can assist: client uses body mechanics:  Verbal prompting by staff.  Clients should attempt to push through their strongest side if appropriate 1 Elimination
moving person in bed If person can assist: To move client across the bed, client positions themselves, using body mechanics:   Staff prompt  client to  bends knees, and shuffles hips across mattress.   Staff may help to stabilise clients  feet, or hand on mattress.  May be used in conjunction with bed stick,  bed rope, or monkey bar. 1  
moving person in bed If person can assist: To move across the bed, client positions themselves using a slide sheet, with prompting from staff.  Slide sheet folded &  placed under clients hips. Client bends knees, and shuffles hips across mattress.  ( staff may help to stabilise clients   feet).      May be used in conjunction with bed stick,  bed rope, or monkey bar. 1  
moving person in bed If person can’t assist: To move across the bed, Slide sheets:  slide sheet folded, or 2 separate slide sheets. Staff  pulls top layer of slide sheet, to move client towards them.  If  client heavy, use 2 staff.  2nd staff  can push at clients hip and shoulders, whilst 1st staff  pulls slide sheet.  This transfer may be possible with single slide sheet if client  smaller. 2 Substitution
moving person in bed If person can’t assist: use lifting machine / ceiling hoist.  2 Substitution
moving person in bed Review why there is a need to move person in bed as a change in procedures, process, products may make the need for this task redundant.  3 Training
moving person up the bed If person can assist: Client uses body mechanics:  Verbal prompting by staff.  Client should  push through their strongest side if appropriate.  Client should bend  knees, and encourage them to push though feet, and hands. 1 Elimination
moving person up the bed If person can assist: Client positions themselves using a bed stick, bed rope or  bed ladder.  Client requires high levels of upper limb and strength and co ordination, in both arms for rope and ladder, and at least one arm for bed stick.  Position equipment for use by clients strongest upper limb. 1 Elimination
moving person up the bed If person can assist: Client positions themselves using a slide sheet ( folded) with prompting from staff.  Slide sheet placed under clients hips. Client bends knees, and pushes down on mattress with feet. Staff may help to stabilise clients   feet.    Client slides backwards on slide sheet as they push through feet.  May be used in conjunction with bed stick,  or bed rope. See solution for moving client in bed. 2 Substitution
moving person up the bed If person can’t assist: Slide sheet,1 staff assisting. Place 2 slide sheets under client.  Staff stand at head end of bed ( bed head to be removed).  Staff to grasp top slide sheet at clients shoulders,   pull client up the bed.  Use of single layer of slide sheet  if client small or lightweight 2 Substitution
moving person up the bed If client can’t assist: Slide sheet, Suitable if access to head rest of bed not possible.  2 staff required.  Place 2 slide sheets under client.  Staff stand at either side of bed.  Grasp top slide sheet,  at clients hips and shoulders. Staff stand in line with client hip and shoulder, and slide client towards at head end of bed. Staff to step and transfer their body weight onto their leg closest to the  head end of the bed .  Staff must not  lift slide sheet during sliding action 2 Engineering
moving person up the bed Review why client slides down the bed. A change in procedures, process, products may make the need for this task redundant.  3 Training
moving in bed No Generic Solution available 1  
moving in bed No Generic Solution available 2  
moving in bed No Generic Solution available 3  
moving from bath to shower trolley or change table Avoid transfer.  Client can be showered on trolley 1 Elimination
moving from bath to shower trolley or change table Ceiling or mobile Hoist: Sling can be kept under client whilst in bath.   Staff must minimise  bending into bath.  Adjust bath to suitable height, or staff  adopt semi squat or bracing posture to keep spine aligned, to reach into lower height  bath. Adjust change table/ shower trolley to correct height for staff use. 2 Substitution
moving from bath to shower trolley or change table Mobile hoist:  minimise movement of hoist, position change table as close as possible to bath.  Adjust change table/ shower trolley to correct height for staff use. 2 Engineering
moving from bath to shower trolley or change table No Generic Solution available 3  
assisting person in/out of bath If person can assist: Grab rails:  Specific positioning of grab rails must meet client needs, and particular functional capacity, i.e.; vertical, horizontal, angled, wall mounted, head / foot of bath mounted. Client needs to be able access grab rails with strongest upper limb. 1 Elimination
assisting person in/out of bath If person can assist: Bath board and grab rails:  Client can sit on bath board, and use grab rails to slide across bath.  Suitable for clients who are  unsteady stepping in/out of bath.  Client may be able to lower themselves in / out of the bath off the bath board if they are physically able.  Use of handheld shower if client needs to remain on bath board. 1 Elimination
assisting person in/out of bath If person can assist: Height adjustable bath:  Adjusted for easier transfers in/out by clients, and reduced bending and reaching for staff. 1  
assisting person in/out of bath If person can assist: Adjustable baths - with accessible sides, ( doors), to enable clients to transfer more easily. 1 Elimination
assisting person in/out of bath If person can’t assist: Use Shower trolley if client risk of falls too high during the transfer,  the use of grab rails is not possible,  or no hoist is available. 2  
assisting person in/out of bath If person can’t assist: Use of ceiling or mobile hoist:  Bathing sling required, and should remain under client during bathing. 2  
assisting person in/out of bath If person can’t assist: Bath hoist:  client lowered into bath whilst sitting on bath hoist seat.  They can remain seated on bath hoist during bath.  Slings not required. 2  
assisting person in/out of bath No Generic Solution available 3  
assisting person to bath or shower If person can assist: equipment to maximise client independence:  grab rails, shower stool, hand held shower to enable them to clean themselves with more physical stability, and less physical support / supervision required by staff. 1 Elimination
assisting person to bath or shower Grab rails:  to assist client to raise to standing, to allow staff to access  client  for thorough washing. 1 Elimination
assisting person to bath or shower If person can’t assist: shower chair:  client can sit during shower for increased stability. Staff use stool for washing lower body areas. Must have non slip feet on legs of chair. 2 Substitution
assisting person to bath or shower If person can’t assist: mobile shower/commode chair / Shower Trolley: to avoid transferring clients manually to shower, where they are unstable walking.  Transfer between toilet  and shower can be avoided.  Staff can move mobile chair to gain better access to clients, to minimise bending and reaching during showering. 2 Substitution
assisting person to bath or shower If person can assist: Hand held shower hose:  client may be able to assist more with their showering.  Staff likely to be able to maintain more aligned postures, closer to client, as water is directed more specifically 2 Engineering
assisting person to bath or shower Staff should wear a water proof apron and shoe covers (in non slip areas only), to encourage them to work closer to client without getting wet. And to minimise  bending and reaching into the shower. 2 Substitution
assisting person to bath or shower If person can’t assist: shower trolley:  if client unable to maintain sitting posture in shower chair, or  staff are unable to access all body parts with client  in shower chair. 2 Engineering
assisting person to bath or shower No Generic Solution available 3  
shaving person Avoid  or delay shaving where client agitated. 1 Elimination
shaving person Client positioning:  for increased stability, and easier staff access; eg in chair, in bed.   Head support for client may be  necessary, i.e. wheelchair/ lounge chair  with head rest, or when in bed, elevate back rest of bed. 2 Substitution
shaving person Shaver:  trial variety of  types, i.e.:  battery, electric, may be more tolerable for some clients.  Clients may be able to assist themselves safely with mechanical shaver. 2 Engineering
shaving person Mobile stool for staff:  Staff can position themselves on height adjustable mobile stool, to adjust their posture.  Staff should maintain  upright posture,  and work close to client to avoid reaching and bending.  Mobile stool enables staff to readjust their positioning as required. 2 Substitution
shaving person Consistent technique: to maximise clients ability to assist, anticipate, and cooperate with staff.  Consistent techniques by staff maximises client's function, and reduces risk of  client uncertainty, or behavioural triggers. 3 Training
shaving person Regular discussion between house staff, at house meetings to ensure consistency in techniques used, and household routine for shaving.  This is  particularly  important where client tendency to become agitated with shaving. 3 Administration
shaving person Household routine should ensure shaving is performed daily.  Less frequent shaving increases force and discomfort for client. 3 Training
shaving person Where client behaviour impacts on staff, develop consistent strategies, eg; regular/ routine time each day, or when  client most relaxed, use of incentives. 3 Administration
assisting person from sitting to standing If person can’t assist: Avoid  manual transfer:  where client unable to weight bear independently or with use of mobility aid. 1 Elimination
assisting person from sitting to standing If person can’t assist: Lift chair:  manual or electric. 1 Elimination
assisting person from sitting to standing If person can assist: lift cushion or foam inserts:  Placed on top of chair,  manually adjusted, to assist client to standing.  Can be moved between chairs. 1 Elimination
assisting person from sitting to standing If person can assist: verbal prompting to assist clients to use their own body mechanics to transfer independently. Clients should not grasp mobility aid until they are in standing position.  Walking aids are  not usually stable enough for clients to pull on  to standing. 1 Elimination
assisting person from sitting to standing If person can assist: Modify chair:  to maximise clients ability to use their own body mechanics, i.e.:  chair  as high as possible, whilst client still has foot support.  Chair should not too deep, and should have  firm cushioning and arm rests for client to push on.  Client's knees should be slightly lower than hips, and feet spaced evenly on the floor,  in line with front of chair. 1 Elimination
assisting person from sitting to standing If client can weight bare  with assistance; Client uses body mechanics,  1 staff assists. Staff to stand side on to client, and prompt client to  lean forwards. Staff to guide clients hips forward off the chair by pushing client’s hips forward gently, as  client pushes on arm rests of chair.   Staff to  support clients at shoulder and hip to  help stabilise initially once  standing. Staff  to transfer their weight to front leg, i.e.  in direction of client transfer. . 2 Substitution
assisting person from sitting to standing If client can weight bare  with  assist: Client uses body mechanics,  2 staff assist. Staff to stand on each side of  client, and prompt client forwards.  Staff  to guide clients hips forward off the chair, by pushing client’s hips forward gently,  whilst client pushes on armrest of chair, or reaches forward.   Staff to  support clients at shoulder and hip to  help stabilise initially once standing. Staff to transfer their  weight to their front leg, i.e. in direction of client transfer. . 2 Engineering
assisting person from sitting to standing No Generic Solution available 3  
assisting person with personal hygiene If person can assist: client manages independently.  Has suitable grab rails to assist transferring on/off toilet. 1 Elimination
assisting person with personal hygiene If person can’t assist: mobile commode: If client unable to stand during transfer on/off toilet, staff to be aware of minimising bending and reaching, maintain spinal alignment. 2 Substitution
assisting person with personal hygiene If person can’t assist: Mechanical hoist:  If thorough personal hygiene not possible with client in sitting, and client is unable to transfer between chair and toilet. 2 Engineering
assisting person with personal hygiene If person can’t assist: height adjustable Shower trolley:  If client unable to maintain sitting posture in shower chair, or  staff are unable to access all body parts with client  in shower chair. Use low steps of lifting machine.  2 Substitution
assisting person with personal hygiene If person can’t assist: Continence Aides:  investigate use of , or availability of  alternative types, to suite staff accessibility, where client mobility limited. 3 Training
moving from shower trolley or change table to wheelchair If person can assist: transfer to standing: verbal  prompts for  client to transfer from change table.  Client may be able to use grab rail to pull up to sitting on the trolley.  Lower height of change table to allow client's feet to reach the floor. ( see transfers out of bed) 1 Elimination
moving from shower trolley or change table to wheelchair If person can’t assist: Ceiling or mobile Hoist: Sling can be fitted by rolling client, whilst lying on the change table or shower trolley. Ceiling or mobile hoists are the most commonly used method of transferring clients off change table and shower trolley. 2 Elimination
moving from shower trolley or change table to wheelchair Assessment of client function and ability to use manual transfers,  I individual manual transfer methods may need to be tailored to each client, depending on functional ability, i.e. left/ right sided weakness, cognitive ability. 3 Training
moving on or off shower trolley/change table If person can assist: transfer to standing: verbal  prompts for  client to transfer from change table.  Client may be able to use grab rail to pull up to sitting on the trolley.  Lower height of change table to allow client's feet to reach the floor. Small steps could be used. ( see transfers out of bed) 1 Elimination
moving on or off shower trolley/change table If person can’t assist: Ceiling or mobile Hoist: Sling can be fitted by rolling client, whilst lying on the change table or shower trolley. Ceiling or mobile hoists are the most commonly used method of transferring clients off change table and shower trolley. 2 Substitution
moving on or off shower trolley/change table No Generic Solution available 3  
supporting persons head whilst brushing teeth Avoid  or delay where possible: if  client agitated, & needs head support, due to mood. 1 Elimination
supporting persons head whilst brushing teeth toothbrush style:  trial variety of  types, i.e.:  battery, electric, may be more tolerable for some clients.  Clients may be able to assist themselves safely with mechanical toothbrush. 2 Substitution
supporting persons head whilst brushing teeth Mobile stool for staff:  Staff can position themselves on height adjustable mobile stool, to adjust their posture.  Staff should maintain  upright posture,  and work close to client to avoid reaching and bending.  Mobile stool enables staff to readjust their positioning and working height as required. 2 Engineering
supporting persons head whilst brushing teeth Firm backed cushion: provision of a cushion  with a rigid side.  This could be placed behind clients back in their chair, and extend for head support.  This could provide a portable form of head support for client. 2 Substitution
supporting persons head whilst brushing teeth Client positioning: if head support required,   use wheelchair with head support, or  lounge chair  with head rest, or when in bed, with back rest elevated.  Avoid supporting clients head manually, with hand. 2 Engineering
supporting persons head whilst brushing teeth Use additional cleaning methods, i.e. mouth washes, ( if tolerable for client),  to minimise amount of time cleaning is required 2 Substitution
supporting persons head whilst brushing teeth Consistent technique: to maximise clients ability to assist, anticipate, and cooperate with staff.  Consistent techniques by staff maximises client's function, and reduces risk of  client uncertainty, or behavioural triggers. 3 Training
physically supporting/holding person while bathing If person can’t assist: avoid bathing, if sustained holding required. Shower client or use shower trolley as alternative. 1 Elimination
physically supporting/holding person while bathing If person can assist: Provision of a bath insert to support client 1 Elimination
physically supporting/holding person while bathing If person can assist: Grab rails so client can support themselves 1 Elimination
physically supporting/holding person while bathing Use low water level to eliminate the need to hold client. 1 Elimination
physically supporting/holding person while bathing Shower client: use a shower chair or use a reclining or moulded shower chairs  where client is unable to sit unaided. 2 Substitution
physically supporting/holding person while bathing No Generic Solution available 3  
moving from wheelchair to toilet If person can assist: Grab rails:  client able to assist and weight bear.  Wheelchair positioned in front of toilet & at right angle to the toilet,  with grab rails in front.  Client stands from wheelchair, holds grab rails, and pivots to toilet.  Grab rails must be accessible to clients  strongest side. 1 Elimination
moving from wheelchair to toilet If person can’t assist: mechanical hoist - mobile or ceiling hoist.  Sling fitted to client in wheelchair.  Sling can often be left under client in wheelchair, to reduce number of times sling fitting required. Ensure sling suitable for toileting. If using mobile hoist, minimise movement of hoist with client suspended 2 Substitution
moving from wheelchair to toilet If person can assist: Grab rails:  client weight bares, with staff assistance.  Staff prompt verbally, and assist to stabilise and pivot client  hips.  Wheelchair positioned in front of  & at  right angles to toilet,  with grab rails in front.  Client  holds grab rails, stands, pivots to toilet.  Grab rails must be  accessible to clients  strongest side. 2 Engineering
moving from wheelchair to toilet If person can’t assist: Grab rails & slide board: client has upper body strength,  cognition  but is unable to weight bare sufficiently through legs.   Client positions wheelchair, ( parallel to  toilet).  Slide board is placed under clients buttock, and across to toilet.  Client reaches across to grab rails and slides self across  to toilet.  Staff may assist to position slide board, and guide hips. 2 Engineering
moving from wheelchair to toilet If person can’t assist: Mobile commode chair:   Where manual transferring  onto toilet not possible, eg, or space too confined, no ceiling hoist, client not physically able to assist with transfer, client to be showered directly after toileting. 2 Engineering
moving from wheelchair to toilet Consider change in work practices: Do toileting, then showering, commode to shower trolley via hoist 3 Training
assisting person to eat If person can assist: food presentation & cutlery modification:  To enable client manage food independently, eg:  finger food, cut into portions, modified grips on cutlery, weighted non spill plates and cups, easy grip cups.  Ensure client sitting height maximises upper limb  function, and stability. 1 Elimination
assisting person to eat If person can’t assist: Position client at table: for staff easiest access, and to avoid reaching, twisting and bending.  Staff seated across the corner of the table from client, i.e. 45 degree angle  is best.  Staff can rest elbow on table top whilst client chewing, swallowing, to reduce static muscle tension in the shoulders.  Staff should be seated to avoid bending. 2 Substitution
assisting person to eat If PEG feeding make sure equipment is organised and readily accessible. 2 Engineering
assisting person to eat Staff seating: manoeuvrable, height adjustable ( gas lift), stool to allow staff to position themselves suitably, i.e. correct height, reach, pivot, and to push themselves  away quickly if necessary. 2 Engineering
assisting person to eat No Generic Solution available 3  
dressing/undressing and or putting on shoes If person can assist: suitable clothing:  organise clothing to promote independence, i.e.; easy to fit,  large enough, simple fastening, wide necks, stretchable or loose fitting.  Clothes often shrink with time, or are purchased without ease of dressing considered.  Shoes and socks , should have  wide opening, Velcro fastening, long  handled shoe horn, sock aids. 1 Elimination
dressing/undressing and or putting on shoes If person can assist: Client techniques:  prompt consistent method, to reduce confusion and frustration, eg; dress less functional side first, and undress most functional side first. Appropriate seating, and footstool to help client stability and reaching to feet.  Allow adequate time 1 Elimination
dressing/undressing and or putting on shoes Client assists and can weight bear:  dress less functional side first, and undress most functional side first.  Dress upper body whilst client seated - staff  to access  both sides of  chair to avoid reaching.  place pants over lower limbs, pull to knees.  client stands, and staff raises, fastens pants.   Fit shoes & socks before client stands to assist with stability. 1 Elimination
dressing/undressing and or putting on shoes If person can’t assist: client techniques: dress with staff assistance.  prompt consistent method, to reduce confusion and frustration for client, eg dress less functional side first, and undress most functional side first. Appropriate seating, and footstool to help client stability and reaching to feet.  Allow adequate time.  Staff may assist client to position and fit clothes. 2 Substitution
dressing/undressing and or putting on shoes Staff dressing stool:  Mobile height adjustable stool to allow staff to position themselves suitably for reaching to clients lower limbs and feet. , i.e. prevents staff bending and reaching, and  to  push themselves  away quickly if necessary, eg client kicks. Elevate clients feet on box or step,  to reduce bending 2 Substitution
dressing/undressing and or putting on shoes No Generic Solution available 3  
assisting person to be positioned in a chair at a table or chairs in general If person can’t assist: Avoid transfer.  Client can be positioned at dining table in wheelchair. 1  
assisting person to be positioned in a chair at a table or chairs in general Verbal Prompting: Staff  encourage clients to remain standing until dining chair is positioned appropriately.  Use incentives and prompts if necessary, i.e.; behavioural rewards,  eg,   withholding  meal until she is correctly positioned in a the table. Staff must not slide chair with client in it. 1  
assisting person to be positioned in a chair at a table or chairs in general Suitable seating:  client chair correct height, with arm rests to push on, and not too deep, with firm foot support.  This maximises clients ability to transfer on/off and to remain upright in sitting.  Chairs can be modified, i.e.; raising blocks, cushion at back to reduce depth, foot support to prevent slipping /slumping in chair. 1  
assisting person to be positioned in a chair at a table or chairs in general Mobile dining chair:  dining chair with lockable castors. These chairs are also usually height adjustable.  Ensure chair is adjusted to correct height, and castors locked for mealtimes. Staff must avoid pushing chair into table, with client seated in it. 1  
assisting person to be positioned in a chair at a table or chairs in general If person can’t assist: Avoid transfer.  Client can be positioned at dining table in wheelchair. 2  
assisting person to be positioned in a chair at a table or chairs in general Verbal Prompting: Staff  encourage clients to remain standing until dining chair is positioned appropriately.  Use incentives and prompts if necessary, i.e.; behavioural rewards,  eg,   withholding  meal until she is correctly positioned in a the table. Staff must not slide chair with client in it. 2  
assisting person to be positioned in a chair at a table or chairs in general Suitable seating:  client chair correct height, with arm rests to push on, and not too deep, with firm foot support.  This maximises clients ability to transfer on/off and to remain upright in sitting.  Chairs can be modified, i.e.; raising blocks, cushion at back to reduce depth, foot support to prevent slipping /slumping in chair. 2  
assisting person to be positioned in a chair at a table or chairs in general Mobile dining chair:  dining chair with lockable castors. These chairs are also usually height adjustable.  Ensure chair is adjusted to correct height, and castors locked for mealtimes. Staff must avoid pushing chair into table, with client seated in it. 2  
assisting person to be positioned in a chair at a table or chairs in general No Generic Solution available 3  
dressing person in bed Client able to assist:  Adjust bed height to suit staff.  Client helps roll body to side, prompt clients to roll or use bed stick, grab rail or bed rail. Dress less functional side first, & undress most functional side first. Minimise the amount of rolling, pull clothes over same side hip and shoulder, then roll to opposite side.  staff should have access to both sides of bed. 1 Elimination
dressing person in bed If person can’t assist: Avoid dressing clients upper body in bed, where client is able to  sit upright. Dressing upper body is best performed with client sitting upright. 2 Substitution
dressing person in bed client unable to assist:  2 staff assist, stand on each side of bed.  Adjust bed height to suit taller staff. Dress less functional side first & undress most functional side first.   Minimise amount of rolling, pull clothes over same side hip and shoulder, then roll to opposite side.   Use of slide sheet may assist to move client across the bed for easier rolling. 2 Engineering
dressing person in bed If person can’t assist: Dress upper body in chair:  Access to  upper body is easier if client seated.  Upper body is bed dressed when client sitting upright, to minimise amount of rolling required. Dress, less functional side first & undress most functional side first. 2 Substitution
dressing person in bed If person can’t assist: Suitable clothing:  ensure clothes easy to fit, i.e. large enough, simple fastening, wide necks, stretchable or loose fitting.  Clothes often shrink with time, or are purchased without ease of dressing considered.  Especially shoes and socks 2 Engineering
dressing person in bed If person can’t assist: Shoes and socks:  should be fitted  whilst clients on bed, where legs are elevated. 2 Substitution
dressing person in bed No Generic Solution available 3  
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Patterns of clients gait and epilepsy is well documented and communicated to staff.  This helps to avoid unfamiliar staff offering assistance, where it is not required. 1 Elimination
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Avoid walking:  Limit walking where client risk of falling / injury is high.  Limit walking where staff  are more likely to  try to assist client in the event of a  fall, eg community, uneven surfaces,  other people around. 1 Elimination
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Walking for mobility/exercise and can be restricted to specific times, eg,  safe environments, or certain times when client more relaxed, well, responsive, less fatigued. Use wheelchair or mobile commode for personal care tasks & transfers 1 Elimination
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Identification of warning/ indicators of client risks:  where clients are more likely to fall, or have  seizures, i.e.: notable triggers.  Staff to limit client walking during these times. 1 Elimination
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Prompting: identify most appropriate prompts to  simplify instructions, maximise client comprehension, and guide physical movements.  Ensure unnecessary assistance is not provided by staff. 2 Substitution
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Mobility Aid:  provision of suitable aide, to maximise mobility and reduce incidence of fall.   Most appropriate aide for physical and cognitive ability needs to be considered. 2 Engineering
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions Staff require training in the  most suitable techniques for each individual client.  Training in postural methods for staff  assisting with assisted walking, and support during falling. Staff should not attempt to catch or stop client from falling. Techniques are possible for staff to assist a client to lower to the floor safely in some situations. 3 Training
persons who fall, drop, have an awkward gait or have difficulty understanding and/or following instructions If dropping is a behavioural issue engage appropriate professional to assist with developing strategies, identifying causes etc 3 Training
moving from floor to wheelchair Avoid or limit  client being on the floor, if they are unable to transfer off the floor independently. 1 Elimination
moving from floor to wheelchair Avoid lifting/ pulling client off the floor:   allow time,  provide verbal prompting, and chair, to assist client to transfer without providing  physical assistance.  Use of mechanical hoist is necessary if client unable to assist themselves off floor, or follow instructions. 1 Elimination
moving from floor to wheelchair Avoid transfer:  if client injured - call ambulance.  Following seizure, wait until client recovered sufficiently, and able to transfer  independently, or with prompting by staff. 1 Elimination
moving from floor to wheelchair Client able to assist:  client rolls onto hands and knees.  Staff place chair in front of client.  Client reaches with one hand, and kneels on one knee.  On staff prompt, client pushes on hand and foot and pivots to sitting. 2 Substitution
moving from floor to wheelchair Client transfers to standing:  Client transfers to sitting first, using chair to assist.  They can proceed to standing/ walking from chair if they are physically able. 2 Engineering
moving from floor to wheelchair mechanical hoist - mobile or ceiling hoist.  If client laying down, position the hoist close enough to the client to avoid having to lift clients  head and shoulders  to fit sling to hoist. 2 Substitution
moving from floor to wheelchair Review practices as to why client is on the floor. This may eliminate the need for this task.  3 Training
moving from floor to wheelchair Identify tasks where client drops and use other types of transfers 3 Training
assisting person from sitting to standing No Generic Solution available 1  
assisting person from sitting to standing No Generic Solution available 2  
assisting person from sitting to standing No Generic Solution available 3  
moving from wheelchair to lounge/couch Avoid transfer:  client can remain in wheelchair in some situations.  Where high levels of physical assistance is required, staff should avoid manual transfers. 1 Elimination
moving from wheelchair to lounge/couch client independent, providing chairs are positioned suitably, i.e. wheelchair close to lounge - at right angles.  Lounge chair has arm rests, that client can reach for to assist them to stand, and pivot to lounge. 1 Elimination
moving from wheelchair to lounge/couch Avoid clients using couches, where client cannot transfer themselves, or do not have a mechanical hoist.  Clients positioned in the middle of the couch, have no armrests, and staff cannot stand to the side of client to assist with transfer.  There is increased risk of clients laying down which increases the physical demands  & difficulty  required to transfer off. 1 Elimination
moving from wheelchair to lounge/couch If person can assist: Client uses body mechanics: Position wheelchair  at 90 o or opposite lounge.  Clients should transfer towards their strongest side. 1 Elimination
moving from wheelchair to lounge/couch Suitable  lounge chair:  with firm cushioning, suitable height,  depth, armrest height & firm  foot support.  this helps client body mechanics, to transfer independently.  Provision of chair raising blocks, back cushion to reduce seat depth, or lift cushion,  to assist client transferring off lounge. (see sitting to standing) 1 Elimination
moving from wheelchair to lounge/couch If person can assist: Client uses body mechanics, with assistance:  Position wheelchair  at 90 degrees or opposite lounge.  Clients to transfer to strongest side.   Check client firm foot support, feet spaced evenly.   Client leans forward into standing, reaching to  armrest of  lounge.  Staff  prompt clients hips forward & to pivot to chair, use of walk/transfer belt may be suitable. 1 Elimination
moving from wheelchair to lounge/couch If person can’t assist: Slide board: client has upper body strength,  cognition  but is unable to weight bear.   Client positions wheelchair at 90 degrees beside lounge.  Slide board is placed under clients buttock, and across to lounge.  Client reaches across to grab rails and slides self across  to lounge.  Staff may assist to position slide board, and guide clients hips. 2 Engineering
moving from wheelchair to lounge/couch If person can’t assist: Lift cushion: to assist client to stand out of lounge. 2 Substitution
moving from wheelchair to lounge/couch If person can’t assist: Use mechanical hoist - sling can be kept under client in lounge chair to eliminate need to refit the sling. 2 Substitution
moving from wheelchair to lounge/couch No Generic Solution available 3  
guiding and supporting persons to walk (including when out in the community) Avoid walking with client: where  they lean  heavily on staff, or are prone to falls or dropping.  Avoid walking with client in community where they require sustained physical assistance  and support from staff. 1 Elimination
guiding and supporting persons to walk (including when out in the community) Assisting clients walking in community: may need to be avoided due to additional risks, i.e.; longer distances, unfamiliar or uneven  surfaces &  ground, distractions. Consider using wheelchair or walking aid if assistance required. 1 Elimination
guiding and supporting persons to walk (including when out in the community) Prompting: identify most appropriate prompts to  simplify instructions, maximise comprehension, and guide physical movements.  Ensure assistance is not provided by staff where client does not require it.  This may lead to confusion, and increased dependence. 1 Elimination
guiding and supporting persons to walk (including when out in the community) Mobility Aid:  provision of suitable aide, to maximise mobility and reduce incidence of fall.   Most appropriate aide for physical and cognitive ability needs to be considered. 2 Substitution
guiding and supporting persons to walk (including when out in the community) Identification of warning/ indicators of client risks:  where clients are more likely to fall, or seizure, i.e.: notable triggers.  Staff to limit client walking during these times. 3 Training
guiding and supporting persons to walk (including when out in the community) Staff require training in methods to assist individual clients to walk.  Depending on client's physical function, the method used  may need to be modified.  Training in postural methods for staff , to avoid sustained  bending, reaching, lifting  and twisting. 3 Training
guiding and supporting persons to walk (including when out in the community) Method of assistance when walking in community: May need to be  modified from methods used at home.  There are Increased risks in community due to unfamiliar environment, more distractions, unpredictable floor surfaces, and longer distances travelled. 3 Administration
assisting person to walk on gradients Avoid:   where assistance required by clients causes them to lean heavily on staff, or risk of falling is increased. 1 Elimination
assisting person to walk on gradients If person can assist: Client should use handrails, walking aid, or wheelchair and client should have suitable footwear. 1 Elimination
assisting person to walk on gradients Avoid walking on gradients where possible, i.e. take alternative route. 1 Elimination
assisting person to walk on gradients Use of wheelchair, or other mobility aid, to eliminate client need to walk on gradients. 1 Elimination
assisting person to walk on gradients Mobility Aid:  provision of suitable aide, to maximise mobility.   Most appropriate aide for physical and cognitive ability needs to be assessed 1 Elimination
assisting person to walk on gradients Assistance from staff:  Client requires some physical prompting, i.e.;  see " Physical assistance from staff", supporting clients from behind or beside. 2 Substitution
assisting person to walk on gradients Physical assistance from staff:  Assistance should be in the form of prompting, guidance and stabilizing, encouraging.  Staff must not support clients body weight.  Staff should prompt client at shoulder and hips, to help maintain clients upright stance.  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Engineering
assisting person to walk on gradients Physical assistance beside client:  Staff stand side on to client, support client under their forearm, ( to prompt their shoulders to upright), and at the back of their hips, ( to prompt clients hips forward, into  upright stance). 2 staff can assist with this method, standing on each side of client.  This method is suitable for short distances only, i.e. between rooms. 2 Substitution
assisting person to walk on gradients Physical assistance from staff: Should not include linking arms, holding clients hands, walking backwards whilst supporting clients, allowing clients to hold staff shoulders for support. 2 Engineering
assisting person to walk on gradients No Generic Solution available 3  
pushing person up gradient in wheelchair Avoid where possible, i.e. take alternative path,  even if longer route or avoid venue 1 Elimination
pushing person up gradient in wheelchair Drive client:  To  avoid use of wheelchair in street with steep gradient. 1 Elimination
pushing person up gradient in wheelchair Use elevators:   where possible, rather than ramps in shopping centres 1 Elimination
pushing person up gradient in wheelchair Use electric wheelchair or get a specialized add on electric motor.  1 Elimination
pushing person up gradient in wheelchair No Generic Solution available 2  
pushing person up gradient in wheelchair Ensure wheelchair tyres are properly inflated.  Staff must attempt to maintain upright stance, and keep elbows braced close to waist. Staff  to use  legs and body weight to push wheelchair.  Avoid leaning and reaching forwards up the hill. 3  
pushing wheelchairs over rough ground/gutters (including when out in the community) Avoid where possible, i.e. take alternative path, even if longer route or avoid venue 1 Elimination
pushing wheelchairs over rough ground/gutters (including when out in the community) Drive client: if it is not possible to avoid travelling over steep gradient, uneven ground, or gutters. 1 Elimination
pushing wheelchairs over rough ground/gutters (including when out in the community) Use electric wheelchair or get a specialized add on electric motor.  1 Elimination
pushing wheelchairs over rough ground/gutters (including when out in the community) Provision of ramp to be placed over gutter.  Ramps can be portable. 1 Elimination
pushing wheelchairs over rough ground/gutters (including when out in the community) Place block or small ramp  in corner of the gutter if staff need to use this regularly. 2 Engineering
pushing wheelchairs over rough ground/gutters (including when out in the community) Wheelchair down gutters:  If cannot be avoided, back client/ wheelchair down gutter, to avoid risk of client falling.  Ease rear wheels down the gutter.  Attempt to let them roll, do not lift wheelchair. Tilt wheelchair back slightly to allow the front wheels to roll down.  Ensure wheelchair is square to the gutter.  2 staff  assisting. 3 Training
pushing wheelchairs over rough ground/gutters (including when out in the community) wheelchair up gutters:  If cannot be avoided, face client/wheelchair up the gutter, to prevent them falling. Tilt wheelchair onto rear wheels, to allow front wheels onto gutter, then roll rear wheels onto gutter.  2 staff to assist where possible.  Do not lift wheelchair. 3 Training
pushing wheelchairs over rough ground/gutters (including when out in the community) Ensure wheelchair tyres are properly inflated.  Staff must attempt to maintain upright stance, stand close to wheelchair, and keep elbows braced close to waist.  Staff must use their legs and body weight to push wheelchair, stay square to the wheelchair, to avoid twisting.  Avoid leaning and reaching forwards up the hill. 3 Training
pushing wheelchairs over rough ground/gutters (including when out in the community) Report to local council broken or rough footpaths 3 Administration
persons whose mobility needs change when they are outside the house/accessing the community Avoid walking with client: where  they lean  heavily on staff, or are prone to falls or dropping.  Avoid walking with client in community where they require sustained physical assistance  and support from staff. 1 Elimination
persons whose mobility needs change when they are outside the house/accessing the community Assisting clients walking in community: may need to be avoided due to additional risks, i.e.; longer distances, unfamiliar or uneven  surfaces &  ground, distractions. Consider using wheelchair or walking aid if assistance required. 1 Elimination
persons whose mobility needs change when they are outside the house/accessing the community Prompting: identify most appropriate prompts to  simplify instructions, maximise comprehension, and guide physical movements.  Ensure assistance is not provided by staff where client does not require it.  This may lead to confusion, and increased dependence. 1 Elimination
persons whose mobility needs change when they are outside the house/accessing the community Mobility Aid:  provision of suitable aide, to maximise mobility and reduce incidence of fall.   Most appropriate aide for physical and cognitive ability needs to be considered. 1 Elimination
persons whose mobility needs change when they are outside the house/accessing the community Identification of warning/ indicators of client risks:  where clients are more likely to fall, or seizure, i.e.: notable triggers.  Staff to limit client walking during these times. 1 Elimination
persons whose mobility needs change when they are outside the house/accessing the community No Generic Solution available 2 Training
persons whose mobility needs change when they are outside the house/accessing the community Staff require training in methods to assist individual clients to walk.  Depending on client's physical function, the method used  may need to be modified.  Training in postural methods for staff , to avoid sustained  bending, reaching, lifting  and twisting. 3 Training
persons whose mobility needs change when they are outside the house/accessing the community Method of assistance when walking in community: May need to be  modified from methods used at home.  There are Increased risks in community due to unfamiliar environment, more distractions, unpredictable floor surfaces, and longer distances travelled. 3 Administration
securing seatbelts/A frames in vehicles No Generic Solution available 1  
securing seatbelts/A frames in vehicles Replace straps, or A frames:  with more advanced system where possible. 2 Substitution
securing seatbelts/A frames in vehicles Ensure wheelchair and A frame are in good condition, i.e.; not bent or damaged.  Wheelchair straps should be stored appropriately, i.e., not left laying on floor when not in use.  This may cause them to  get caught under wheelchairs, or difficult to reach once wheelchairs loaded. 2 Substitution
securing seatbelts/A frames in vehicles Preparation:  Prior to loading bus, ensure seatbelts, wheelchair straps and A frames are  positioned for easiest access. 2 Engineering
securing seatbelts/A frames in vehicles .  Wheelchair straps/  A frame lever should be pulled or pushed directly forwards or backwards from body, whist in squat position do not pull across the body.  Pulling across the body is not as powerful and increases injury risk through twisting. 2 Substitution
securing seatbelts/A frames in vehicles Use kneeling pad,  to assist with comfort when kneeling on bus floor. 2 Engineering
securing seatbelts/A frames in vehicles Bus loading sequence:  Should  maximise access to A frame, & wheelchair straps.  Avoid loading other  wheelchairs or clients  until  A frame/ wheelchair straps secured.  Where multiple wheelchairs and A frame are used, ensure loading pattern maximises accessibility for each chair. 2 Substitution
securing seatbelts/A frames in vehicles Bus loading and securing wheelchairs:  2 staff assist,  & rotate tasks,  i.e., alternate between loading and securing wheelchairs, to minimise physical demands on individual staff bending and reaching to locking mechanism. 2 Engineering
securing seatbelts/A frames in vehicles No Generic Solution available 3  
assisting persons during seizures or during other medical situations Allow client to stay on floor.  Do not attempt to move them or transfer them, until they are recovered, or ambulance is in attendance. 1 Elimination
assisting persons during seizures or during other medical situations Avoid lifting/ pulling client off the floor:   allow time,  provide verbal prompting, and chair, to assist client to transfer without providing  physical assistance.  Use of mechanical hoist is necessary if client unable to assist themselves off floor, or follow instructions. 1 Elimination
assisting persons during seizures or during other medical situations Avoid transfer:  if client injured - call ambulance.  Following seizure, wait until client recovered sufficiently, and able to transfer  independently, or with prompting by staff. 1 Elimination
assisting persons during seizures or during other medical situations Assistance from staff:  remain with client, but do not physically support, i.e. lifting, carrying moving them.  Reassure client, talking, maintain their dignity,  provide comfortable,  blanket, pillow, until medical assistance available, or client recovers . 1 Elimination
assisting persons during seizures or during other medical situations Client able to assist  to transfer off the floor:  client rolls onto hands and knees.  Staff place chair in front of client.  Client reaches with one hand, and kneels on one knee.  On staff prompt, client pushes on hand and foot and pivots to sitting.  They can proceed to standing/ walking from chair if they are physically able 1 Elimination
assisting persons during seizures or during other medical situations Client transfers  off the floor:  Client transfers to sitting first, using chair to assist.  . 1 Elimination
assisting persons during seizures or during other medical situations Assisted Falling:  If  client falls whilst staff assisting, staff can help ease them to the floor. ( see supported walking methods). Staff may be able to help client fall, by using their hip or knee as a brace for client, as they lower to the floor.  Staff may kneel or squat to the floor, with client.   Do not try to catch, lift, or stop client falling. 2 Substitution
assisting persons during seizures or during other medical situations Assist client from floor using methods outlined  ( Assisting person from floor to chair using hoist). 2 Substitution
assisting persons during seizures or during other medical situations mechanical hoist - mobile or ceiling hoist.  If client laying down, position the hoist close enough to the client to avoid having to lift clients  head and shoulders  to fit sling to hoist. 2 Substitution
assisting persons during seizures or during other medical situations No Generic Solution available 3  
assisting person from floor to standing Avoid or limit  client being on the floor, if they are unable to transfer off the floor independently. 1 Elimination
assisting person from floor to standing Avoid lifting/ pulling client off the floor:   allow time,  provide verbal prompting, and chair, to assist client to transfer without providing  physical assistance.  Use of mechanical hoist is necessary if client unable to assist themselves off floor, or follow instructions. 1 Elimination
assisting person from floor to standing Avoid transfer:  if client injured - call ambulance.  Following seizure, wait until client recovered sufficiently, and able to transfer  independently, or with prompting by staff. 1 Elimination
assisting person from floor to standing client manages independently.  Staff use verbal prompts, to guide client off the floor, into sitting and then standing. 1 Elimination
assisting person from floor to standing Client able to assist:  client rolls onto hands and knees.  Staff place chair in front of client.  Client reaches with one hand, and kneels on one knee.  On staff prompt, client pushes on hand and foot and pivots to sitting.  Client can then proceed to standing after sitting. 1 Elimination
assisting person from floor to standing If person can assist: Client transfers to standing:  Client transfers to sitting first, using chair to assist.  They can proceed to standing/ walking from chair if they are physically able. 1 Elimination
assisting person from floor to standing If person can’t assist: mechanical hoist - mobile or ceiling hoist.  If client laying down, position the hoist close enough to the client to avoid having to lift clients  head and shoulders  to fit sling to hoist. 2 Substitution
assisting person from floor to standing No Generic Solution available 3  
assisting person to sit in kitchen/lounge chairs or couch Client independent, providing chairs are positioned suitably, i.e. wheelchair close to lounge - at right angles.  Chairs have  arm rests, that client can reach for to assist them to stand, and pivot to lounge. 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch Avoid clients using couches, where client cannot transfer themselves, or do not have a mechanical hoist.  Clients positioned in the middle of the couch, have no armrests, and staff cannot stand to the side of client to assist with transfer.  There is increased risk of clients laying down which increases the physical demands  & difficulty  required to transfer off. 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch Electric lift lounge chair: 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch verbal prompting to assist clients to use their own body mechanics to transfer independently. Clients should not grasp mobility aid until they are in standing position.  Walking aids are  not usually stable enough for clients to pull on  to standing. 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch Suitable chairs:  with firm cushioning, suitable height,  depth, armrest height & firm  foot support.  this helps client body mechanics, to transfer independently.  Provision of chair raising blocks, back cushion to reduce seat depth, or lift cushion,  to assist client transferring off lounge. (see sitting to standing) 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch Client uses body mechanics: Position wheelchair  at 90 degrees or opposite lounge.  Clients should transfer towards their strongest side. 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch Lift cushion / foam cut outs: to assist client to stand out of lounge, to transfer into alternative chair.  Can be moved between chairs. 1 Elimination
assisting person to sit in kitchen/lounge chairs or couch If person can’t assist: Client uses body mechanics, with assistance:  Position wheelchair  at 90 o or opposite lounge.  Clients to transfer to strongest side.   Check client firm foot support, feet spaced evenly.   Client leans forward into standing, reaching to  armrest of  lounge.  Staff  prompt clients hips forward & to pivot to chair, use of walk/transfer belt may be suitable. 2 Substitution
assisting person to sit in kitchen/lounge chairs or couch If person can’t assist: Slide board: client has upper body strength,  cognition  but is unable to weight bear.   Client positions wheelchair at 90 o  beside lounge.  Slide board is placed under clients buttock, and across to lounge.  Client reaches across to grab rails and slides self across  to lounge.  Staff may assist to position slide board, and guide clients hips. 2 Engineering
assisting person to sit in kitchen/lounge chairs or couch Unable to assist:  Use mechanical hoist - sling can be kept under client in lounge chair to eliminate need to refit the sling. 2 Substitution
assisting person to sit in kitchen/lounge chairs or couch If person can’t assist: Client uses body mechanics,  1 staff assist. Staff to stand side on to client, and prompt leaning forwards. Guide clients hips forward off the chair,  whilst client pushes on arm rests of chair.   Staff to  support clients at shoulder and hip to  help stabilise initially once  standing. Staff lunge towards front of chair as client stands. 2 Engineering
assisting person to sit in kitchen/lounge chairs or couch If person can’t assist: Client uses body mechanics,  2 staff assist. Staff to stand on each side of  client, and prompt client forwards. Staff guide clients hips forward off the chair,  whilst client pushes on armrest of chair.   Staff to  support clients at shoulder and hip to  help stabilise initially once standing. Staff lunge sideways towards front of chair as they guide  client to standing. 2 Substitution
assisting person to sit in kitchen/lounge chairs or couch No Generic Solution available 3  
assisting visually impaired persons Maximise alternative sensory information, i.e. tactile & auditory, to avoid  physical assistance required from staff.  Consult vision clinic to identify range of options that can be implemented, to allow client to mobilise independently. 1 Elimination
assisting visually impaired persons Arrange furniture to avoid obstacles, and ensure  consistency.  Where client can learn the layout of rooms and furniture, and can be confident that the layout  will be consistent, they are more likely to be confident to ambulate independently. 1 Elimination
assisting visually impaired persons Guided walking:  Adopt methods consistent with vision clinic  advice, however, consider  overall  physical ability.  Physical assistance from staff should be in the form of prompting, guidance and stabilizing, encouraging.  Staff must not support clients body weight. 2 Engineering
assisting visually impaired persons Guided & assisted walking:  in conjunction with provision of suitable aide, to maximise mobility.   Most appropriate aide for physical and cognitive ability needs to be assessed. 2 Substitution
assisting visually impaired persons Physical assistance should not  include linking arms, holding  clients hands, walking backwards whilst supporting clients, or allowing clients to hold staff's shoulders for support. 2 Engineering
assisting visually impaired persons Identification of warning/indicators of client risks:  where clients are fatigued,  uncooperative, or more likely to fall, or  lean heavily on staff.   Staff  should  limit client walking during these times. 2 Substitution
assisting visually impaired persons Physical assistance from staff:  Assistance should be in the form of prompting, guidance and stabilizing, encouraging.  Staff must not support clients body weight.  Staff should prompt client at shoulder and hips, to help maintain clients upright stance.  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Engineering
assisting visually impaired persons Physical assistance beside client:  Staff stand side on to client, support client under their forearm, ( to prompt their shoulders to upright), and at the back of their hips, ( to prompt upright stance). 2 staff can assist with this method, standing on each side of client.  This method is suitable for short distances only, i.e. between rooms. 2 Substitution
assisting visually impaired persons No Generic Solution available 3  
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Avoid walking with client: where  they lean  heavily or grab  staff.  Avoid walking with these client in community where they require sustained physical assistance from staff, with more distractions and unpredictably. 1 Elimination
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Mobility Aid:  provision of suitable aide, to maximise mobility and reduce incidence of fall.   Most appropriate aide for physical and cognitive ability needs to be considered. 1 Elimination
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Identification of warning indicators, where clients likely to lean more heavily.  Avoid walking clients on these occasions, or  clients in situations where client unsure / uncomfortable, eg; outdoors, bathroom, shopping centres. 2 Substitution
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Prompting: identify most appropriate prompts to  advise clients that walking will cease until appropriate gait pattern / independence is maintained. Ensure client is not provided by with assistance  where they  do not require it.  This may lead to confusion,  reinforce attention seeking behaviour or increased dependence.. 2 Substitution
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Physical assistance from staff: All methods described, allow for staff " self protective postures", i.e. they can remove support from client where client attempts to grab or lean heavily.  Staff  are less likely to be able to grab staff,  and if additional stability/support required, staff can offer it with less risk of injury, i.e. no lifting, reaching or bending. 2 Engineering
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Physical assistance from staff:  Assistance should be in the form of prompting, guidance and stabilizing, encouraging.  Staff must not support clients body weight.  Staff should prompt client at shoulder and hips, to help maintain clients upright stance.  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Substitution
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Physical assistance from behind client: Staff  walking behind client  should prompt client at shoulder and hips, to help maintain clients upright stance.  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Engineering
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Physical assistance beside client:  Staff stand side on to client, support client under their forearm, ( to prompt their shoulders to upright), and at the back of their hips, ( to prompt upright stance). 2 staff can assist with this method, standing on each side of client.  This method is suitable for short distances only, i.e. between rooms. 2 Substitution
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Physical assistance from staff:   Should not include linking arms, holding clients hands, walking backwards whilst supporting clients, allowing clients to hold staff shoulders for support. 2 Engineering
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Method of assistance when walking in community: May need to be  modified from methods used at home.  Increased risks in community due to unfamiliar environment, more distractions, unpredictable floor surfaces, and longer distances travelled. 2 Substitution
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Staff require training in methods to assist individual clients to walk.  Depending on client's physical function, the method used  may need to be modified.  Training in postural methods for staff , to avoid sustained  bending, reaching, lifting  and twisting. 3 Training
assisting person to walk where person leans on staff for support or grabs staff unexpectedly when unsure/uncomfortable Assessment of individual client function and most suitable assistance  method, if possible 3 Administration
assisting person up or down stairs Avoid stairs where client unstable, or unsure. Use lifts, ramps, or avoid venue where possible. 1 Elimination
assisting person up or down stairs eliminate steps from home environment, where client requires mobility assistance. 1 Elimination
assisting person up or down stairs client to use grab rail beside stairs. Ensure grab rails are accessible to their stronger side ( if clients  have an obvious stronger  leg or arm. ) 1 Elimination
assisting person up or down stairs Physical assistance from staff:  Assistance should be in the form of prompting, guidance and stabilizing, encouraging.  Staff must not support clients body weight.  Staff should prompt client at shoulder and hips,  to help maintain clients upright stance.  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Engineering
assisting person up or down stairs Clients should step up stairs leading with their strongest leg.  Stepping down stairs, lead with their weaker leg. If they have an obvious stronger side. Staff support client's weaker side. 2 Engineering
assisting person up or down stairs Physical assistance from behind client: Staff  walking behind client  should prompt client at shoulder and hips, to help maintain clients upright stance.  Staff can prompt client at hips, to step, with appropriate timing .  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Substitution
assisting person up or down stairs Physical assistance beside client:  Staff stand side on to client, support client under their forearm, ( to prompt their shoulders to upright), and at the back of their hips, ( to prompt upright stance, and stepping action). 2 staff can assist with this method, standing on each side of client.  This method is suitable for short distances only. 2 Engineering
assisting person up or down stairs Physical assistance from staff:   Should not include linking arms, holding clients hands, walking backwards whilst supporting clients, allowing clients to hold staff shoulders for support. 2 Substitution
assisting person up or down stairs Method of assistance using steps in community: May need to be  modified from methods used at home.  Increased risks in community due to unfamiliar environment, more distractions, unpredictable floor surfaces, and longer distances travelled. 2 Engineering
assisting person up or down stairs Staff require training in methods to assist individual clients to walk.  Depending on client's physical function, the method used  may need to be modified.  Training in postural methods for staff , to avoid sustained  bending, reaching, lifting  and twisting. 3 Training
assisting person up or down stairs Assessment of individual client function and most suitable assistance  method, if possible 3 Administration
moving person up or adjusting persons in wheelchair Avoid client losing their upright position in chair: suitable chair, firm foot support, suitable height, depth, seat recline, one way slip cushion.  Correct positioning in chair with initial transfer. 1 Elimination
moving person up or adjusting persons in wheelchair Avoid assisting:   client often repositions themselves when they are ready or prompted. 1 Elimination
moving person up or adjusting persons in wheelchair hoist transfer into chair:  ensure sling suitable, and hoist transfer lowers and positions client suitably, so as not to require repositioning. Repeat hoist positioning  in chair if necessary. 2 Substitution
moving person up or adjusting persons in wheelchair Client assists:  prompt client to push through their feet and hands on arm rests, to push back in chair. Staff may need to physically prompt client to position their feet for firm support, and push through arm rests of chair. 2 Substitution
moving person up or adjusting persons in wheelchair client unable to assist:  leave sling under client in chair, and reposition using the hoist. 2 Engineering
moving person up or adjusting persons in wheelchair client unable to assist:  recline seat - if possible, and allow client to slide back into seat - gentle pushing at front of clients knee may help. 2 Substitution
moving person up or adjusting persons in wheelchair Client unable to assist:  slide sheets.  Specific design help slide client back in chair. 2 Engineering
moving person up or adjusting persons in wheelchair Assessment of individual client function and most suitable assistance  method, and equipment to be used, i.e. suitability of chair  & sling. Possible modifications to these. 3 Training
moving person up or adjusting persons in wheelchair Staff require training in methods to assist individual clients  to be positioned correctly in chair. Depending on client's physical function, the method used  may need to be modified. 3 Administration
manoeuvring wheelchairs in tight spaces Avoid taking wheelchair:  into confined spaces where possible. 1 Elimination
manoeuvring wheelchairs in tight spaces Modify confined environment - where possible, i.e. remove unnecessary furniture, or renovate room. 1 Elimination
manoeuvring wheelchairs in tight spaces Use alternative chair, eg, wheeled commode, or shower chair that may be smaller, and easier to turn 2 Engineering
manoeuvring wheelchairs in tight spaces Where insufficient space around wheelchair to push from behind, staff stand beside wheelchair and push it across their bodies, i.e. sideways pushing action for staff - this prevents them bending reaching  and twisting. 2 Substitution
manoeuvring wheelchairs in tight spaces Ensure wheelchair tyres fully inflated for easier manoeuvrability 3 Training
persons who need assistance getting in/out of vehicles Avoid transferring clients, who require excessive physical  support from staff, i.e.; clients have  limited weight bearing, unable to transfer from chair to standing. Theses clients should use a wheelchair taxi, or bus with wheelchair  hoist. 1 Elimination
persons who need assistance getting in/out of vehicles client assists into standing :pivots legs around to sit square to the car door opening.  Open car door window, to provide additional handhold for client.  Client pushes up with hand on door and car seat into standing. Client should transfer towards their stronger side. 1 Elimination
persons who need assistance getting in/out of vehicles client assists into sitting: pivots legs around to sit square to the car door opening.  Open car door window, to provide additional handhold for client.   Position wheelchair as close as possible to door. Client pushes up with hand on door and car seat, and pivots onto the wheelchair. 1 Elimination
persons who need assistance getting in/out of vehicles Pivot disc:  A pivoting cushion that assists clients to pivot on the car seat, when turning to place their legs in/out of car. 1 Elimination
persons who need assistance getting in/out of vehicles Transferring on/off buses.  Clients should step up stairs leading with their strongest leg.  Stepping down stairs, lead with their weaker leg. If they have an obvious stronger side. Prompt clients to use grab rails 1 Elimination
persons who need assistance getting in/out of vehicles Physical assistance from staff:  Assistance should be in the form of prompting, guidance and stabilizing, encouraging  preparing equipment.  Staff must not support clients body weight.  Staff should prompt client at shoulder and hips,  to help maintain clients upright stance.  Prompt clients to use available handholds.  Walk/transfer belt provides handhold for staff to pivot client  hips. 2 Substitution
persons who need assistance getting in/out of vehicles wheelchair & slide board: client has upper body strength,  cognition  but is unable to weight bear.   Positions wheelchair as close as possible to car.  Slide board is placed under clients buttock, and across to car seat.  Client reaches across and slides self across  slide board.  Staff may assist to position slide board, and guide hips. Slide sheet may also be used on transfer board to assist. 2 Substitution
persons who need assistance getting in/out of vehicles Physical assistance from behind client: Staff  walking behind client  should prompt client at shoulder and hips, to help maintain clients upright stance, handholds on bus.  Staff can prompt client at hips, to step, with appropriate timing .  Walk/transfer belt helps provide handholds on client  hips for staff. 2 Substitution
persons who need assistance getting in/out of vehicles Physical assistance from staff:   Should not include linking arms, holding clients hands, walking backwards whilst supporting clients, allowing clients to hold staff shoulders for support. 2 Engineering
persons who need assistance getting in/out of vehicles Method of assistance using step in community: May need to be  modified from methods used at home.  Increased risks in community due to unfamiliar environment, more distractions, unpredictable floor surfaces, and longer distances travelled. 2 Substitution
persons who need assistance getting in/out of vehicles No Generic Solution available 3  

Last modified at 18/03/2009 18:59  by Damien Ryan